1. An internet connection (in case net setter data card require device drive then it can download them from internet directly).
2. Disable Antivirus if you have any (I am using Eset AVAST which i have disabled during unlock procedure)
3. You must have to download two files, 1) Download CDMA Workshop Full version and 2) Huawei e1732 downgrade firmware. (7zip will be needed to unzip the cdma workshop files)
4. Make sure that your modem is detected in your PC and you should know the PORT number on which your modem is connected.
5. Insert any SIM in modem Excepting idea (don’t insert idea SIM).

Steps to Unlock Huawei e1732 Idea Net Setter

1. Disable Antivirus till the time unlocking is finished, because the crack of “CDMA Workshop v2.7” will be automatically deleted by your antivirus software.
2. Insert Idea Net Setter modem in you PC/Laptop.
3. Go to My Computer >> Properties >> Device Manager >> Ports (COM & LPT)  >> HUAWEI Mobile Connect – 3G Application Interface (COM[X]), here X is the port number appear in your system. Note down the com port number in which your huawei e1732 idea net setter is connected.
4. Now Open “CDMA Workshop v2.7.0.exe“.
   
5. Under the “Main” tab Select Port number(“COM Settings (AT mode)”) which you have get in step 3 and click on Connect button.
6. Click on Read button.
   
7. Go to “Security” tab > Type “000000” in the blank box under SPC. Click on SPC button >> Send button with Default (nv_read) as SPC.
   
8.  Now Go to “Memory” tab and in NV Items section Click on Read button. A Conform box will appear, just click OK and you will see a NV Items Backup box. In the box “Last NV Item” type “9999”  and Click OK. Save the file by giving a file name you like (i.e. E1732Unlockfile etc.)
   
   
   
9. Once the buffer reach 100% your file is saved successfully, now click OK on Information box.
10. Minimize the “CDMA Workshop v2.7.0.exe” application.
11. Now Open E1732 Downgrader application and run it. Accept the license agreement and click Next >> Wait for a few seconds until the search for your modem finishes.
    (Don’t mark “Auto remove the device after update” check box) and click next and Start.
    
12. At the end of  Downloading Programs… you will get an “Update Failure!” error message box, just go ahead and click OK and then Finish.
13. Again Maximize “CDMA Workshop v2.7.0.exe” application.
14. Go to “Main” tab and Click on Finish button – Unplug your idea net setter now.
15. Again Plugin your idea net setter modem in the computer and again find the Port number from device manager (as discussed in step 3)
16. Now go to “CDMA Workshop v2.7.0.exe” and select the Port that you noted from your device manager
17. Go to “Main” tab and click on “Connect”.
18. Go to “Memory” tab and click on NV Items >> Write button. On confirm box click “OK” >> “Open” dialog box will appear. Choose the file that you saved before and wait till the buffer reaches to “100%” a “Information” dialog box appears with a success message.
19. Click “OK”  and go to “Main” tab >> Disconnect.
20. Now close “CDMA Workshop v2.7.0” >> A “Confirm” dialogue box will appear >> Click “NO”
21. Now you have successfully unlocked it

• Unlock idea netsetter
• unlock idea 3g netsetter huawei e1732
• unlock huawei e1732
• how to unlock idea 3g netsetter huawei e1732?
• unlock idea 3g usb modem
• unlock idea 3g netsetter